Oscillator v2 is a compact analog voltage controlled oscillator (VCO). It is built on the same principle as its big brother was. The module is controlled by a 1-volt signal per octave and can play notes within a 5-octave range. A coarse and fine tuning...
The Waldorf DVCA1 is a dual-channel, analog voltage-controlled amplifier designed for use in synthesizers and other music production gear. It is capable of producing a wide range of sounds from subtle to extreme, and features a high-gain, low-noise...
The module contains three voltage-controlled band pass filters, which can work independently or in parallel. Each filter provides the ability to adjust the filter's steepness, center frequency and bandwidth. All the main parameters of each filter can be...
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
The Phase Shifter module is an analogue 16-step phaser. In addition to the output at the sixteenth stage, there’s another mix (dry/wet) is provided after the eight one. In addition, there are outputs after the seventh and fifteenth steps which allow no...